4) You will need to have on hand new toilet tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line) and maybe some pipe glue. Ask the sales person at the hardware store for a more defined list.
The wax ring is used to seal the drain outlet on the bottom of the toilet to the drain opening in the floor. When a toilet is installed, the ring is placed onto the drain... the toilet is dropped onto the ring... and the toilet bolts (also known as closet bolts) are tightened enough to lock the toilet in place. If that wax gasket ring starts to fail or isn't seated properly? Sewer gasses can sneak out from under your toilet causing your bathroom to have that suspicious smell. It can also cause water line repair to escape, sometimes invisibly, with each flush potentially damaging the floor hidden under the toilet.
81. Ever since I heard of a crew member cross threading the regulator whilst changing the gas bottle and causing a gas explosion, I have made it a two man job. One man does the actual change, and a second checks that it has been done properly.
10) Tighten down the closet bolts making sure NOT to use too much torque. You aren't installing tires on a race car here so, take it easy Mr. Goodwrench. You just want to hold the toilet in place, not crack the porcelain base of the toilet or damage the drain flange.
Plumbers, like all other companies, are required to be on time and act professional. If they have called before hand to notify you then, this can be overlooked. However, if they turn up without apologising for being late, then they may not be the right plumber for you. Remember first water line repair impressions are everything. If they lack a good first impression then this may indicate that it is going to have an impression on their work. In most cases, you would have taken the time off work for the plumber, and what can be worse than waiting all day waiting for them to arrive?
If you do in fact choose to replace it, there is a good chance that you have an Aqua Magic IV which is no longer produced and has been replaced with the new Aqua Magic V. If you are replacing your toilet and have the Thetford Aqua Magic IV, there are other options such as the Thetford Aqua Magic Style Plus or Thetford Bravura Toilet as well as choices from the Sealand line of toilets. You will have to choose whether you want a hand or foot flush, and whether you want to stay with plastic or upgrade to china. You will also have the choice of adding a water saver. Regardless of which choice you make you will most likely be happy with the quality and dependability of any product available.
Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.